REARS MFG. CO.
Home  |  Products  |  Contact  |  About us  |  Service
1-800-547-8925 (toll free) or 1-541-688-1002 (local)
Winter Storage
Preparing for winter storage...
Run pump for five minutes with clean water. Drain all lines, valves and manifolds. Open ports on pumps and tank sumps allowing to drain. A charge of pressurized air in plumbing lines sometimes will aid the removal of water. A gallon of antifreeze solution circulated through the plumbing will prevent freezing and subsequent cracked manifolds and split hoses. More antifreeze solution may be needed for long runs in hose reels or boom wings.

A fresh application of grease to driveline couplings, cross kits, agitator bearings and other drive bearings before putting the machine away is good practice.

Do not leave chemical in your tank for long periods of time! Water will evaporate leaving behind a high concentration of possibly corrosive chemical.
Home  |  Products  |  Contact  |  About us  |  Service  |  Dealer log in
 © Rear's Manufacturing Company (2010)